Displaying publications with Levy as a coauthor. The other publications are available here Publications by year Most documents on this website are protected by copyright.
By clicking on a PDF icon, you confirm that you or your institution
has the right to do so. Note that the definitive versions of all EG papers (Eurographics,...) can be downloaded from http://www.eg.org/EG/DL. ACM papers (Siggraph, ...) can be downloaded from http://www.acm.org/dl/. “Least Squares Conformal Maps for Automatic Texture Atlas Generation” Bruno Lévy, Sylvain Petitjean, Nicolas Ray and Jérome Maillot ACM SIGGRAPH conference proceedings, 2002 Abstract: A Texture Atlas is an efficient color representation for 3D Paint Systems. The model to be textured is decomposed into charts homeomorphic to discs, each chart is parameterized, and the unfolded charts are packed in texture space. Existing texture atlas methods for triangulated surfaces suffer from several limitations, requiring them to generate a large number of small charts with simple borders. The discontinuities between the charts cause artifacts, and make it difficult to paint large areas with regular patterns. In this paper, our main contribution is a new quasiconformal parameterization method, based on a leastsquares approximation of the CauchyRiemann equations. The sodefined objective function minimizes angle deformations, and we prove the following properties\,: the minimum is unique, independent of a similarity in texture space, independent of the resolution of the mesh and cannot generate triangle flips. The function is numerically well behaved and can therefore be very efficiently minimized. Our approach is robust, and can parameterize large charts with complex borders. We also introduce segmentation methods to decompose the model into charts with natural shapes, and a new packing algorithm to gather them in texture space. We demonstrate our approach applied to paint both scanned and modeled data sets. BibTex reference @INPROCEEDINGS{levy:LSCM:2002,
AUTHOR = "Lévy, Bruno and Petitjean, Sylvain and Ray, Nicolas and Maillo
t, Jérome",
TITLE = "Least Squares Conformal Maps for Automatic Texture Atlas Generation",
BOOKTITLE = "ACM SIGGRAPH conference proceedings",
YEAR = "2002",
EDITOR = "ACM",
MONTH = "Jul",
URL = "http://www.loria.fr/publications/2002/A02R065/A02R065.ps",
}
Supplemental material, links, hindsight ...
Further reading
For a detailed explanation of LSCM and other parameterization methods,
see our book
Polygon Mesh Processing (Botsch, Kobbelt, Pauly, Alliez and
Levy), Chapter 3 (Differential Geometry) and Chapter 5 (Mesh
Parameterization).
Resources
 For an easiertounderstand explanation of the method, see the
SIGGRAPH 2007 Parameterization course notes, page 38 and Chapter 10
(pages 7989). The reader interested in complex analysis may read pages 39,40 but it's not
necessary to understand and implement the method.
 An implementation is available in our OpenNL
numerical library (if you need something you can include in your own
application),
 ... and also in
Graphite (if you need a GUI).
 The textured Stanford bunny (teaser image) is available
here .
 The 3D OpenSource modeler Blender now offers LSCM texture unwrapping.
Brecht Van Lommel and Jens Ole Wund integrated OpenNL in Blender, more details given
here
and here .
 Tutorials for using LSCM in blender: here ,
here and
here (with video).
 Microsoft's UVatlas
(part of DirectX) uses our texture packing algorithm.
 The 3D modeler Silo uses LSCM for texture atlas generation.
Erratum and discussions
In our paper about Least Squares Conformal Maps, presented at Siggraph
in July 2002, we have erroneously claimed that the orientation of the
triangles is preserved. Further investigations have shown that the
gradient of the LSCM function is equal to the gradient of the
Dirichlet energy for inner vertices (i.e. Pinkall's cotangent
formula). Therefore, like all other approaches based on this formula
triangle flips may occur when the involved coefficients become
negative. In practice, we have not observed this phenomenon in real
data sets, and our segmentation method splits the corresponding
neighborhoods. However, we have found the following 4triangles
surface, for which this problem occurs (Michael Floater has also a
similar example on his webpage).
p1 = (3 0 1) p2 = (1 1 0) p3 = (0 0 0) p4 = (1 1 0)
T1 = (p1, p2, p3) T2 = (p1, p3, p4) T3 = (p1, p4, p2)
We are currently investigating ways of characterizing
configurations where this problem occurs. Before we have a clean
solution, this problem can be fixed using one of the following
strategies:
 As done by Desbrun and Alliez, use Rivara's method, enabling to remove
obtuse angles by inserting new vertices in the triangulation.
 As done by Sheffer, use constrained optimization to enforce the
desired properties. In our case, constraining the sign of the Jacobian
preserves the orientation of the triangles.
 Make a chart boundary split the concerned neighborhoods.
Note that this problem does not concern the other properties
(quadratic expression of the conformal energy, existence and
uniqueness of the solution, independance to resolution, ability to
extrapolate the border by constraining two vertices only, independence
to a similarity applied to those two constrained vertices).
Why did we make that mistake ?
To study the properties of LSCM, we construct a mesh using
two basic operations:
 glue, i.e. add a new triangle to the border,
by connecting three existing vertices;
 join, i.e. add a new triangle and a new vertex to the border.
Any triangulation homeomorphic to a disc can be constructed by these
two operations. Then, we study how these operations modify the linear system
solved by LSCM.
For the existence and uniqueness (i.e. to prove that the matrix is of
maximal rank), join is the easy case (adding a row to a matrix
cannot decrease its rank) and glue requires more work (since it
adds a triangle and a vertex, it adds a row and a column to the matrix).
For the orientation of the triangles (i.e. the sign of the Jacobian),
once we had solved what we had taken for the hard case (i.e. glue),
we thought we were done. But for the orientation of the triangles, the easy
and hard cases are reversed as compared to the rank problem !!
In fact, glue is the easy case, and join requires a more
careful analysis. Knowing that, the proof in our paper shows in fact that a
triangulation constructed by glue operations alone can be
parameterized by LSCM without any triangle flip.
DCP = LSCM
Note: There is also a short
note on Mathieu Desbrun's home page, indicating the equivalence between
his Discrete Conformal Parameterization method (Eurographics, Sept 2002) and
LSCM (Siggraph, July 2002).
Mathieu's remark is based on the relation: Ec + A = Ed,
where Ec corresponds to the conformal energy (minimized by LSCM),
A to the area of the surface, and Ed to the Dirichlet energy.
If A is fixed, then it is clear that minimizing Ec and Ed is equivalent.
Since that {LSCM, DCP} minimize the {conformal,Dirichlet} energy of the
function going from the 3D surface to the (u,v) parameter space, the area
A under consideration is the area of the (u,v) space , therefore:
 In the case of a fixed boundary, A is fixed, and DCP=LSCM (rem:
this is no longer the case in presence of triangle flips)
 In the case of a free boundary, A changes, and more
precautions should be taken to determine whether the augmented
DCP method (with Mathieu's additional
terms to let the border free) is equivalent to LSCM. We have also
shown the equivalence between both methods (the proof is too long
to be included here). However, experimentally,
we have obtained different results using the two methods, and did not
manage to properly extrapolate the border of complex charts
with DCP. We think this comes from a numerical conditioning problem:
the LSCM formulation results in a symmetric matrix, which is not the
case of DCP. In fact, LSCM and DCP are the same quadratic form, with
the difference that LSCM is the Gaussreducted expression of this
quadratic form.
